Minn. R. 1341.0104 - A117.1 SECTION 104, CONVENTIONS
Subpart
1.
A117.1 Section 104.2, Dimensions.
A117.1 Section 104.2 is amended to read as
follows:
104.2
Dimensions. Dimensions that are not stated as "maximum" or "minimum" are
absolute. All dimensions are subject to conventional industry tolerances except
where the dimension is stated as a range with specific minimum and maximum end
points.
Subp. 2.
Section 104.6.
A117.1 Section 104
is amended by adding a Section to read as follows:
104.6
Calculation of
Percentages. Where the required number of elements or facilities to be
provided is determined by calculations of ratios or percentages and remainders
or fractions result, the next greater whole number of such elements or
facilities shall be provided. Where the determination of the required size or
dimension of an element or facility involves ratios or percentages, rounding
down for values less than one-half shall be permitted.
Notes
Statutory Authority: MS s 16B.37; 16B.59 to 16B.76; 326B.101 to 326B.194
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.