Minn. R. agency 171, ch. 7450, pt. 7450.0600 - OCCUPANT RESTRAINT
Each vehicle equipped with a wheelchair securement device must be equipped with a Type 2 seat belt assembly with a detachable upper torso portion at each wheelchair position in the vehicle or, in the alternative, must be equipped with a Type 1 pelvic restraint assembly and a length of Type 1 or Type 2 seat belt webbing, with buckle, adequate to encircle the chest of the wheelchair occupant and the backrest of the wheelchair.
Type 1 and Type 2 seat belt assemblies must meet the requirements of S1 to S4.4 of FMVSS No. 209.
Type 1 and Type 2 seat belt assemblies and the detachable upper torso restraint, if a detachable upper torso restraint is installed instead of using a length of seat belt webbing to encircle the chest of the occupant and the backrest of the wheelchair, must be installed and anchored in accordance with S1 to S4.3.2 of FMVSS No. 210.
Notes
Statutory Authority: MS s 299A.01; 299A.12; 299A.18
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.