15 Miss. Code. R. 16-1-4.25.7 - Mechanical and Electric Systems
All mechanical, electrical, plumbing, heating, air-conditioning, and water systems shall meet the requirements of local codes and ordinances as well as the applicable regulation of the licensing agency. Where there are no local codes or ordinances, the most current versions of the following codes and recommendations shall govern:
1. National Electrical Code.
2. National Plumbing Code.
3. American Society of Heating,
Refrigerating, and Air Conditioning Engineers, Inc.
4. Recommendations of the American Society of
Mechanical Engineers.
5.
Recommendations of American Gas Association.
6. National Fire Protection Association. The
heating of licensed facilities shall be restricted to steam, hot water, or warm
air systems employing central heating plants, or Underwriters Laboratories
approved electric heating. The use of portable heaters of any kind is
prohibited with the following exceptions:
a.
Gas heaters must meet all of the following:
i. A circulating type with a recessed
enclosed flame so designed that clothing or other inflammable material cannot
be ignited.
ii. Equipped with a
safety pilot light.
iii. Properly
vented to the outside.
iv.
Approved by American Gas Association or Underwriters
Laboratories.
b. An
approved type of electrical heater such as wall insert
type.
7. Lighting (except
for battery-operated emergency lighting) shall be restricted to
electricity.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.