19 Miss. Code. R. 7-5.01.5 - Instructions for Installation of Used Multi-Section Factory-Built Homes

The floor sections, roof sections, and wall sections are to be fitted together tightly. Connections must be sufficiently sealed to prevent air infiltration. Connection of multi-section Factory-Built homes (two or more sections), when manufacturer's installation instructions are not available shall be as follows:

1. Floor connection: All floors of multi-section Factory-Built homes shall be securely fastened together along the entire length of the home.

2. Roof and Ridge Beams: All roof and ridge beams of multi-section Factory-Built homes shall be securely fastened together along the entire length of the home.

3. End walls: End walls of multi section Factory-Built homes shall be securely fastened together with the proper weather seal material installed.

4. Siding and trim pieces are to be installed at the connection of the sections.

5. The joints at the ridge of the roof shall be secured and weather tight.

6. Plumbing drain lines must be supported off the ground.

7. Crossover, heating and other ducts shall be supported at 4 feet on centers minimum and must be supported off the ground.

Notes

19 Miss. Code. R. 7-5.01.5

Miss. Code Ann. §§ 75-49-1, et seq.; 75-49-11 (Supp. 2015).

Adopted 1/1/2015 Amended 10/1/2016