19 Miss. Code. R. 7-5.06.10.2 - Multi-sectional Factory-Built Homes
A. All used
multi-sectional Factory-Built homes shall have diagonal ties and anchors as
required above for single-wide Factory-Built homes as listed in Tables VI and
VII above. The number of anchors and straps along the mate line of the
multi-sectional Factory-Built home shall be one/half of the required number for
one side of a single wide unit having the same length. A minimum of two of the
anchor and straps are to be placed within 2 ft. of the end of each section of
the home.
B. The installation of
anchors and diagonal ties will be required along the mate line on all used
multiple section Factory-Built homes unless the manufacturers installation
manual for the home is available and specifies that these stabilizing devices
are optional.
C. All new multi-
sectional Factory-Built homes are to be secured at the centerline with straps
and anchors to the specifications in the manufacturer's installation manual or
at the locations designated on the home. In addition to centerline ties
specified by the manufacturer, a centerline tie must be attached within two (2)
feet of each end of each section of the Factory-Built home. Where necessary, an
approved bracket shall be installed by the installer/transporter.
D. All multi-sectional homes shall be lagged
and sealed together in accordance with the manufacturer's installation
instructions. If no manufacturer's installation instructions are available, the
instructions provided in this regulation shall be followed.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.