30 Miss. Code. R. 901-14.2 - Seal of the Licensee
1. Upon completion
of licensure, the licensee will be advised that he shall secure an official
seal which shall be applied to engineering drawings, specifications, reports
and other engineering or surveying documents prepared by him or under his
responsible supervisory control. A copy of the seal imprint shall be furnished
to the Board before the certificate of licensure will be released. Failure to
provide proof of seal may result in disciplinary action by the Board.
2. The seals to be used by the licensees are
to be circular in form and from 1 5/8 to 2 inches in diameter. A copy of the
design is included in this publication.
3. Seals obtained prior to the adoption of
this rule and which are in conformance with prior Board rules are
acceptable.
4. Rubber stamps, which
are identical to the approved seals, in size, design and content may be used by
the licensee at his option.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.