39 Miss. Code. R. 3-5-67
100. WATER METER TESTERS Each utility
furnishing metered water service shall maintain suitable water meter testers at
each plant having 100 or more meters and shall keep same in proper adjustment
so as to register accurately the condition of the meter at all times.
105. CERTIFICATE OF CALIBRATION REQUIREMENTS
Each water meter tester shall be accompanied by a certificate of calibration
indicating that the volumes or weighting devices used have been referred to
proper standards, which standards have been certified by the National Bureau of
Standards or some testing laboratory or other authority of recognized
standing.
110. LOCATION OR METER
TESTER Meter testers shall be located in suitable working space, easily
accessible and equipped with all necessary facilities and accessories. They
shall be available for inspection and use at all reasonable hours by the
authorized representatives of the Commission.
115. PERIODIC TESTS Unless otherwise ordered
by the Commission, each service water meter installed shall be periodically
removed, inspected and tested and in accordance with the following schedule or
as often as the results obtained may warrant to insure compliance with the
provisions of Rule 64.
Five-eights inch meters, ten years or for each 20,000 cubic feet of registration.
Three-fourths inch meters, eight years or for each 300,000 cubic feet of registration.
One inch meters, six years or for each 400,000 cubic feet of registration.
All meters above one inch, every four years.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.