Nev. Admin. Code § 534A.190 - Application for permit for individual geothermal well

An application for a permit to drill or operate an individual geothermal well must be submitted to the Division on a form provided by the Administrator. Except as otherwise provided in NAC 534A.196, an application must:

1. Include a statement of the purpose and estimated depth of the well;

2. Include a description of the kind of casing, equipment for the prevention of a blowout and drilling rig which will be used;

3. Include the name of the owner of the land or designated lot on which the well will be located and the owner of the geothermal resource;

4. Include the name and address of the operator and drilling contractor;

5. Be accompanied by the bond required pursuant to NAC 534A.250;

6. Include a description of the location of the proposed well by the quarter-quarter section, section, township and range. For domestic and commercial wells a street address may be used, if available;

7. Include the global positioning coordinates of the location of the well which:

(a) Are identified by latitude and longitude using decimal degrees or coordinates of the Universal Transverse Mercator system; and

(b) Specify the datum used; and

8. Include the business identification number assigned to the operator by the Secretary of State.

Notes

Nev. Admin. Code § 534A.190

Added to NAC by Comm'n on Mineral Resources, eff. 11-12-85; A 12-16-92; A by R032-19A, eff. 12/16/2019

NRS 513.063, 534A.070, 534A.090