N.J. Admin. Code § 15:3-3.4 - Microfilm standards incorporated by reference

(a) The following standards are hereby incorporated in this subchapter by reference, as amended and supplemented. They are available from the issuing organizations at the addresses listed in this section.

1. American National Standards Institute (ANSI) and International Organization for Standardization (ISO) standards. ANSI and ISO standards cited herein are available from the American National Standards Institute, 11 West 42nd St., New York, NY 10036. The standards can be ordered on line at: webstore.ansi.org/ansidoc store/default.asp.

i. ANSI/ARMA 10-1999, Glossary of Records Management Terms;

ii. ANSI/ISO 10602:1995 or ANSI/NAPM IT9.1-1996 Imaging Materials--Processed Silver-Gelatin Type Black-and-White Film--Specifications for Stability;

iii. ANSI/NAPM IT2.19-1994, American National Standard for Photography--Density Measurements--Part 2: Geometric Conditions for Transmission Density;

iv. ANSI/NAPM IT2.18-1996, Photography--Density Measurements--Part 3: Spectral Conditions;

v. ANSI/PIMA IT9.2-1998, American National Standard for Imaging Media--Photographic Processed Films, Plates, and Papers--Filing Enclosures and Storage Containers; and

vi. ISO 18911:2000, Imaging materials--Processed safety photographic films--Storage Practices.

2. Association of Information and Image Management International (AIIM) standards. AIIM standards cited herein may obtain the following standards from the Association of Information and Image Management, 1100 Wayne Avenue, Suite 1100, Silver Spring, MD 20910. The standards can be ordered on line at: www.aiim.org/.

i. ANSI/AIIM MS1-1996, Recommended Practice for Alphanumeric Computer-Output Microforms--Operational Practices for Inspection and Quality Control;

ii. ANSI/AIIM MS5-1992 (R1998), Micrographic Microfiche;

iii. ANSI/AIIM MS14-1996, Specifications for 16mm and 35mm Roll Microfilm;

iv. ANSI/AIIM MS19-1993, Recommended Practice for Identification of Microforms;

v. ANSI/AIIM MS23-1998, Microfilm of Documents, Operational Procedures/Inspection and Quality Control of First-Generation Silver-Gelatin;

vi. ANSI/AIIM MS32-1996, Microrecording of Engineering Source Documents on 35mm Microfilm;

vii. ANSI/AIIM MS41-1996, Unitized Microfilm Carriers (Aperture, Camera, Copy, and Image Cards);

viii. ANSI/AIIM MS43-1998, Recommended Practice for Operational Procedures/Inspection and Quality Control for Duplicate Microforms of Documents and from COM;

ix. ANSI/AIIM MS45-1990, Recommended Practice for Inspection of Stored Silver-Gelatin Microforms for Evidence of Deterioration; and

x. ANSI/ISO 3334-1991, ANSI/AIIM MS51-1991, Micrographics--ISO Resolution Test Chart No. 2 Description and Use.

3. National Institute of Standards and Technology (NIST) standards. National Institute of Standards and Technology (NIST), formerly the National Bureau of Standards, founded in 1901, is a non-regulatory Federal agency within the U.S. Commerce Department's Technology Administration. NIST standards cited herein may be obtained from the National Institute of Standards and Technology, 100 Bureau Drive, Stop 2322, Gaithersburg, MD 20899-2322. Resolution charts and standards can be ordered on line at: www.nist.gov/.

i. NIST 1010A, Microimage Test Chart.

Notes

N.J. Admin. Code § 15:3-3.4

Amended by 49 N.J.R. 770(c), effective 4/17/2017