N.M. Admin. Code § 19.8.8.802 - DESCRIPTION OF HYDROLOGY AND GEOLOGY: GENERAL REQUIREMENTS
A. Each application
shall contain a description of the geology, and water quality and quantity of
all lands within the proposed permit area and the adjacent area. The
description shall include information on the characteristics of all surface and
ground waters within the permit and adjacent area, and any water, which will
flow into or receive discharges of water from the permit area. The description
shall be prepared according to 19.8.8.802 through 806 NMAC and conform to the
following:
(1) information on hydrology,
water quality and quantity, and geology related to hydrology of areas outside
the proposed permit area shall be provided to the director, to the extent that
this data is available from an appropriate federal or state agency.
(2) If this information is not available from
those agencies, the applicant shall gather and submit this information to the
director as part of the permit application.
(3) The permit shall not be approved by the
director until this information is made available in the application.
B. The use of modeling techniques
may be included as part of the permit application, but the same surface and
ground water information may be required for each site as when models are not
used.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.