N.Y. Comp. Codes R. & Regs. Tit. 6 §§ 361-3.9 - Tables

Table 1
Parameters for Analysis
Total Kjeldahl Nitrogen	Arsenic (As)	Products must also analyze for:
Ammonia	Cadmium (Cd)	Fecal coliform or Salmonella sp. bacteria
Nitrate	Chromium (total) (Cr)	Physical contaminants
Total Phosphorous	Copper (Cu)
Total Potassium	Lead (Pb)
pH	Mercury (Hg)
Total Solids	Molybdenum (Mo)
Total Volatile Solids	Nickel (Ni)
Selenium (Se)
Zinc (Zn)

Table 2
Analyses Required with Permit Application
Biosolids/Sludge Used (dry tons/year)	Minimum Number of Analyses
>15,000	12
>2,500 to 15,000	6
200 to 2,500	3
25 to 199	2
<25	1

Table 3
Analyses Required During Operation - Biosolids
Biosolids Used (dry tons/year)	Minimum Number of Analyses	Reduced Frequency for Low Pollutants*
>15,000	24	12
>2,500 to 15,000	12	6
200 to 2,500	6	4
25 to 199	4	2
<25	2	1

*Applies to facilities where two consecutive years of biosolids pollutant levels are all at or below one-half of the limits found in Table 6 if approved by the department.

Table 4
Annual Product Testing Frequency - Biosolids/Sludge/MSW
Average Product Generated (cubic yards per day)	Number of Analyses
>50	52
5-50	12
<5	6

Table 5
Annual Product Testing Frequency - SSO
Average Product Generated (cubic yards per day)	Number of Analyses
>50	12
5-50	4
<5	2

Table 6
Pollutant Limits
Parameter	Maximum Concentration mg/kg, dry weight
Arsenic (As)	41
Cadmium (Cd)	10
Chromium (Cr-total)	1,000
Copper (Cu)	1,500
Lead (Pb)	300
Mercury (Hg)	10
Molybdenum (Mo)	40
Nickel (Ni)	200
Selenium (Se)	100
Zinc (Zn)	2,500

Notes

N.Y. Comp. Codes R. & Regs. Tit. 6 §§ 361-3.9

Adopted New York State Register September 20, 2017/Volume XXXIX, Issue 38, eff. 11/4/2017 Amended New York State Register June 7, 2023/Volume XLV, Issue 23, eff. 7/22/2023 Amended New York State Register June 21, 2023/Volume XLV, Issue 25, eff. 7/23/2023