This rule lists the industry standards that are referenced in
division 1501:9-1 to 1501:9-11 of the
Administrative Code. Such standards shall be incorporated by reference into and
considered part of the requirements of these rules to the prescribed extent of
each such reference.
The industry standards are listed herein by the organization
setting the standard, the standard identification number and title, the date,
and, if available, the edition of the publication.
(A) American petroleum institute (API)
standards. The website for API is
http://www.api.org/. The address for API is
"
200 Massachusetts Avenue NW, Suite 1100, Washington,
DC 20001-55711220 L Street, NW, # 900,
Washington, DC 20005. " The following API standards are referenced in
these rules:
(1) "5 CT
Specification for Casing and Tubing,"
Ninth
tenth
edition, dated June 20187/00/11;
(2) "TR 5C3 Calculating Performance Properties of Pipe Used as Casing
or
TubingTechnical Report on Equations and Calculations for Casing,
Tubing, and Line Pipe used as Casing and Tubing and Performance.,"
seventhFirst
edition, dated June 201812/00/08;
(3) "10 A Specification for Cements and Materials for Well
Cementing," Twenty-fourth
twenty-fifth edition, dated
March 201912/00/10;
(4) "RP 10 B-2 Recommended Practice for
Testing Well Cements." First
second edition, dated April 20137/00/10;
(5) "10 D Specification for
Bow-Spring Casing Centralizers," sixth edition, dated March 20028/00/10;
(6) "10 TR 4 Considerations Regarding Selection of Centralizers
for Primary Cementing Operations," first edition, dated May 20085/1/2008;
(7) "65-2 Isolating Potential Flow
Zones during Well Construction," second edition,
dated December 2010
12/00/10.
(B) ASTM standards. The website for ASTM
international is
http://www.astm.org/. The address for ASTM
international world headquarters is "100 Barr Harbor Drive, PO Box C700, West
Conshohocken, PA, 19428-2959." The following ASTM standards are referenced in
these rules:
(1) "A500/A 500 M Standard
Specification for Cold-Formed Welded and Seamless Carbon Steel Structural
Tubing in Rounds and Shapes," dated 20202010;;.
(2) "C 150/C 150 M Standard Specification for
Portland Cement," dated 20202011.
(3)
"C33 / C33M-18
Standard Specification for Concrete Aggregates," dated 2018.
(C) National geodetic survey (NGS)
datum. The website for national geodetic survey is
http://www.ngs.noaa.gov/. The
address for
NOAA's national ocean
service
the national geodetic survey is
"
SSMC4
SSMC3,
Room 13317, 1305 East-West Hwy, Silver
Spring, MD 20910." The following NGS datum are referenced in this chapter:
(1) "North American Datum of 1983."
(2) "North American Vertical Datum
1988."
(E) "Rainwater and Land Development: Ohio's
Standards for Stormwater Management, Land Development and Urban Stream
Protection."
The manual may be obtained in its entirety
at https://epa.ohio.gov/dsw/storm/rainwaterThe website for the Ohio department of natural resources
(ODNR) is http://www.ohiodnr.gov/. The
address for ODNR is 2045 Morse road, Columbus, Ohio 43229. 'The Rainwater and
Land Development: Ohio's Standards for Stormwater Management, Land Development
and Urban Stream Protection" document may be obtained from
http://oilandgas.ohiodnr.gov/portals/oilgas/pdf/stormwater/RLD_11-6-14All.pdf.,
third edition 2006, updated as of
November 6,
2014
August 1, 2020.
(F) National flood insurance rate map. The
website for the FEMA flood insurance rate map is
https://msc.fema.gov/. The address
for the FEMA map service center is "P.O. Box 3617 Oakton, Virginia
22124-9617."
(G) American national
standards institute (ANSI) standards. The website for American national
standards institute is
http://ansi.org/.
The address for ANSI headquarters is "1899 L street, NW, 11th floor,
Washington, DC, 20036." The following ANSI standards are referenced in this
chapter: "ANSI/ASME Y 14.1," dated 2012.
(H) Source water assessment and protection
program. The website for the Ohio environmental protection agency's source
water assessment and protection program is
http://www.epa.state.oh.us/ddagw/swap.aspx.
The address for the Ohio environmental protection agency is 50 West town
street, suite 700, Columbus, OH 43215.