Ohio Admin. Code 3745-104-42 - Risk management plan: registration
[Comment: For dates of non-regulatory government publications, publications of recognized organizations and associations, federal rules, and federal statutory provisions referenced in this rule, see paragraph (C) of rule 3745-104-01 of the Administrative Code titled "Referenced materials."]
(A) The owner or operator shall complete a
single registration form that covers all regulated
substances handled in the processes as required by USEPA and include it
in the RMP. The form shall cover all regulated
substances handled in covered processes.
(B) The registration form shall include the
following data:
(1) Stationary source name,
street, city, county, state, zip code, latitude, and longitude, method for
obtaining latitude and longitude, and description of location that latitude and
longitude represent;
.
(2) The
stationary source Dun and Bradstreet number;
.
(3) Name and Dun and Bradstreet number of all
corporate parents;
.
(4) The
name, telephone number, and mailing address of the owner or operator;
.
(5) The name and title of the person or
position with overall responsibility for RMP elements and implementation, and
(optional) the e-mail address for that person or position;
.
(6) The name, title, telephone number, and
twenty-four hour telephone number, and, as of June 21, 2004, the e-mail address
(if an e-mail address exists) of the emergency contact;
.
(7) For each covered process, the name and
CAS number of each regulated substance held above the threshold quantity in the
process, the maximum quantity of each regulated substance or mixture in the
process (in pounds) to two significant digits, the five- or six-digit NAICS
code that most closely corresponds to the process, and the program level of the
process;
.
(8) The
stationary source USEPA identifier;
.
(9) The
number of full-time employees at the stationary source;
.
(10) Whether the stationary source is subject
to OSHA's process safety management (29 CFR
1910.119) as adopted by reference in rule
4167-3-01
of the Administrative Code;
.
(11) Whether the stationary source is subject
to 40 CFR Part 355 or section
3750.05
of the Revised Code and rules adopted thereunder;
.
(12) Whether the stationary source has a CAA
Title V operating permit; and
.
(13) The
date of the last safety inspection of the stationary source by a federal,
state, or local government agency and the identity of the inspecting
entity;
.
(14) As
of June 21, 2004, the name, the mailing address, and the telephone number of
the contractor who prepared the RMP (if any);
.
(15) Source or parent company e-mail address
(optional);
.
(16)
Source homepage address (optional);
.
(17)
Phone number at the source for public inquiries (optional);
.
(18) Local emergency planning committee
(optional);
.
(19)
OSHA voluntary protection program status (optional);
and
.
(20) As of June 21, 2004, the type and the
reason for any changes being made to a previously submitted RMP; the types of
changes to the RMP are categorized as follows:
(a) Updates and re-submissions required under
paragraph (B) of rule
3745-104-49
of the Administrative Code;
(b) Corrections under paragraph (D) of rule
3745-104-49
of the Administrative Code or for purposes of correcting minor clerical errors,
updating administrative information, providing missing data elements or
reflecting facility ownership changes, and which do not require an update and
resubmission as specified in paragraph (B) of rule
3745-104-49
of the Administrative Code;
.
(c) De-registrations required under paragraph
(C) of rule
3745-104-49
of the Administrative Code; and
.
(d)
Withdrawals of an RMP for any facility that was erroneously considered subject
to this chapter.
(21)
Whether a public meeting has been held following an RMP
reportable accident, pursuant to paragraph (B) of rule
3745-104-51
of the Administrative Code.
Notes
Promulgated Under: 119.03
Statutory Authority: 3753.02
Rule Amplifies: 3753.02, 3753.03
Prior Effective Dates: 08/13/1999, 07/01/2005, 01/08/2010
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.