Ohio Admin. Code 3745-400-52 - Processing facility design requirements
Processing facility design plan. The processing facility design plan shall be signed and sealed by a professional engineer registered in Ohio. All drawings, calculations, and narrative shall appear on plan sheets with minimum dimensions of twenty-four inches by thirty-six inches. If narrative is necessary to explain the drawings or calculations, the narrative shall appear on the plan sheet with that drawing or calculation. At a minimum, the processing facility design plan shall contain the following:
(A)
A cover sheet, to be numbered sheet one, that contains
the following information:
(1)
The name, physical address, and mailing address of the
processing facility.
(2)
The processing facility property line and processing
facility boundary to be shown on a road map with a scale of one inch equals no
greater than one mile.
(3)
The name and address of each owner of the land on which
the processing facility is or will be located.
(4)
The name and
address of the professional engineer who prepared the plan.
(B)
Drawings of the processing facility environs and items
located within five hundred feet, unless otherwise specified below, of the
horizontal limits of construction and demolition debris processing illustrated
on a series of plan sheets numbered consecutively 2A, 2B, 2C, etc. with a scale
of one inch equals no greater than two hundred feet including the proposed and
existing horizontal limits of construction and demolition debris processing and
the locations of the following:
(1)
The processing facility property line as determined by
a survey conducted by a professional surveyor registered in
Ohio.
(2)
All existing and proposed roads, railroads, and
structures.
(3)
All occupied dwellings.
(4)
All perennial
streams within one hundred feet of the horizontal limits of construction and
demolition debris processing.
(5)
All category 3
wetlands within one hundred feet of the horizontal limits of construction and
demolition debris processing.
(6)
Existing
topography showing vegetation, streams, wetlands, lakes, springs, and other
surface waters, with a contour interval no greater than five feet and the
general flow direction of all surface waters.
(7)
All public water
supply wells and all developed springs.
(8)
The north
arrow.
(9)
All oil wells and gas wells. If any oil wells or gas
wells are identified in accordance with this paragraph, a letter from the Ohio
department of natural resources or other appropriate agency verifying the type,
location, depth, and status of the well shall be included.
(C)
Drawings of the proposed design and layout of the processing
facility on plan sheets that are numbered consecutively 3A, 3B, 3C, etc. with a
scale of one inch equals no greater than two hundred feet that include the
following:
(1)
The horizontal limits of construction and demolition debris
processing.
(2)
The location, boundaries, maximum dimensions, and
composition of all existing and proposed piles of material.
(3)
The location of
all existing and proposed access roads.
(4)
The location of
all existing and proposed fencing, gates, and natural or other
screening.
(5)
The location of surface water drainage and sediment
control structures.
(D)
Detail drawings
on plan sheets numbered consecutively 4A, 4B, 4C, etc. that include the
following:
(1)
All existing and proposed roads.
(2)
Surface water
drainage and sediment control structures designed in accordance with paragraph
(E)(3) of this rule.
(3)
Visual barriers, if applicable, as specified in rule
3745-400-58 of the
Administrative Code.
(4)
Working surfaces.
(E)
Design
calculations with references to equations used showing site-specific input and
assumptions on plan sheets numbered consecutively 5A, 5B, 5C, etc., that
include the following:
(1)
The maximum rate of processing in cubic yards per
day.
(2)
The maximum volume in cubic yards of mixed construction
and demolition debris the processing facility may accumulate at any
time.
(3)
Calculations for surface water drainage and sediment
control structures in accordance with Ohio environmental protection agency
"Rainwater and Land Development Manual."
Notes
Promulgated Under: 119.03
Statutory Authority: 3714.022
Rule Amplifies: 3714.022, 3714.051
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.