Ohio Admin. Code 4123:1-7-06 - Trunnions
(A) Trunnions and
the devices used to attach them to flasks, buckets, ladles, and other equipment
shall be constructed with a factor of safety of no less than ten.
(B) The diameter of the head on the outside
end of the trunnion shaft shall be no less than one and one-half times the
diameter of the shaft.
(C) When
trunnions are used with wire rope slings or chain, the diameter of the head
shall be no less than the diameter of the shaft plus one and one-half times the
diameter of the sling or chain size used.
(D) The inside corners where the trunnion
shaft joins the base and the head shall be filleted.
(E) The radius of the corner between the
groove and the head shall be approximately equal to the radius of the sling
used, the remainder of the inside edge of the head being straight.
Notes
Promulgated Under: 119.03
Statutory Authority: 4121.12, 4121.121, 4121.13, Const. Art. II, Sec. 35
Rule Amplifies: 4121.13, 4121.47
Prior Effective Dates: 01/01/1981
Promulgated Under: 119.03
Statutory Authority: 4121.12, 4121.121, 4121.13, Const. Art. II, Sec. 35
Rule Amplifies: 4121.47
Prior Effective Dates: 01/01/1981
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.