Ohio Admin. Code 4901:5-5-03 - Forecast report requirements for electric utilities and transmission owners
(A) Summary of the long-term forecast report.
The long-term forecast report shall contain a summary describing the electric utility's forecast of loads and the resource plan to meet that load, and shall include at a minimum:
(1) The planning objectives.
(2) A summary of its forecasts of energy and
peak load demands and the key assumptions or projections underlying these
forecasts.
(3) A description of the
process by which the energy and peak load forecasts were developed.
(B) General guidelines. The
following guidelines shall be used in the preparation of the forecast:
(1) The forecast must be based upon
independent analysis by the reporting electric transmission owner or electric
utility.
(2) The forecast may be
based on those forecasting methods that yield the most useful results to the
electric transmission owner or electric utility.
(3) Where the required data have not been
calculated directly, relevant conversion factors shall be displayed.
(C) Special subject areas.
(1) The following matters shall specifically
be addressed:
(a) A description of the extent
to which the reporting electric transmission owner or electric utility
coordinates its load and resource forecasts with those of other systems such as
affiliated systems in a holding company group, associated systems in an
integrated operating system or other coordinating organizations, or other
neighboring systems.
(b) A
description of the manner in which such forecasts are coordinated, and any
problems experienced in efforts to coordinate forecasts.
(c) A brief description of any polls,
surveys, or data-gathering activities used in preparation of the
forecast.
(2) No later
than six months prior to the required date of submission of the forecast, the
commission may supply the reporting electric transmission owner or electric
utility:
(a) Copies of appropriate commission
or other state documents or public statements that include the state energy
policy for consideration in preparation of the forecast.
(b) Such current energy policy changes or
deliberations, which, due to their immediate significance, the commission
determines to be relevant for specific identification in the forecast
(including, but not limited to new legislation,
regulations, or adjudicatory findings). The reporting person shall provide a
discussion of the impacts of such factors and how it has taken these factors
into account.
(3)
Existing energy efficiency, demand reduction, and demand response programs and
policies of the reporting person, which support energy conservation and load
modification, shall be described along with an estimate of their impacts on
energy and peak demand and supply resources.
(4) Energy-price relationships:
(a) To the extent possible, identify the
relationship between price and energy consumption and describe how such changes
are accounted for in the forecast.
(b) To the extent possible, specify a demand
function that will or can be used to identify the relationship between any
dynamic retail prices and peak load, which captures the impact of price
responsive demand.
(c) A
description of, and justification for, the methodologies employed for
determining such energy-price relationships shall be included.
(D) Forecast
documentation. The purpose of the documentation section of the report is to
permit a thorough review of the forecast methodology and test its validity. The
components of the forecast documentation include:
(1) A description of the forecast methodology
employed, including:
(a) Overall
methodological framework chosen.
(b) Specific analytical techniques used,
their purpose, and the forecast component to which they are applied.
(c) The manner in which specific techniques
are related in producing the forecast.
(d) Where statistical techniques have been
used:
(i) All relevant equations and
data.
(ii) The size of the standard
error of the estimate, and the size of the forecasting error, associated with
each relevant forecasting model equation,
.
this
This
information shall be included for each forecast at the bottom of forms FE-D1 to
FE-D6.
(iii) A description of the
technique.
(iv) The reason for
choosing the technique.
(v)
Identification of significant computer software used.
(e) An explanation of how controllable and
interruptible loads are forecasted and how they are treated in the total
forecast.
(f) An identification of
load factors or other relevant conversion factors and a description of how they
are used within the forecast.
(g)
Where the methodology for any sector has changed significantly from the
previous year, a discussion of the rationale for the change.
(2) Assumptions and special
information. The reporting person shall:
(a)
For each significant assumption made in preparing the forecasts, include a
discussion of the basis for the assumption and the impact it has on the
forecast results. Give sources of the assumption if other than the reporting
person.
(b) Identify special
information bearing on the forecast (e.g., the existence of a major planned
industrial expansion program in the area of service or other need determined on
a regional basis).
(3)
Database documentation. The responsibilities of the reporting person with
regard to its forecast database are as follows:
(a) The reporting person shall provide or
cause to be provided:
(i) A brief description
of all data sets used in making the forecast, both internal and external, input
and output, and a citation to the sources.
(ii) The reasons for the selection of the
specific database used.
(iii) A
clear identification of any significant adjustments made to raw data in order
to adapt them for use in the forecast, including, to the extent practicable:
(a) The nature of the adjustment
made.
(b) The basis for the
adjustment made.
(c) The magnitude
of the adjustment.
(b) If a hearing is to be held on the
forecast in the current forecast year, the reporting person shall provide to
the commission in electronic formats or other medium as the commission directs,
all data series, both input and output, raw and adjusted, and model equations
used in the preparation of the forecast.
(c) The reporting person shall provide to the
commission, on request:
(i) Copies of all data
sets used in making the forecasts, including both raw and adjusted data, input
and output data, and complete descriptions of any mathematical, technical,
statistical, or other model used in preparing the data.
(ii) A narrative explaining the data sets and
any adjustments made with the data to adapt it for use in the
forecast.
Notes
Promulgated Under: 111.15
Statutory Authority: R.C. 4935.04, 4901.13
Rule Amplifies: R.C. 4935.04
Prior Effective Dates: 07/26/1978, 04/02/1983, 06/01/1983, 07/02/1984, 10/14/1985, 11/20/1987, 01/15/1990, 03/24/1997, 09/18/2000, 05/31/2007, 12/10/2009
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.