Or. Admin. Code § 340-230-0140 - Reporting and Testing

(1) Reporting:

(a) Stack test results shall be reported to the Department within 60 days of completion;

(b) All records associated with continuous monitoring data including, but not limited to, original data sheets, charts, calculations, calibration data, production records and final reports shall be maintained for a continuous period of at least one year and shall be furnished to the Department upon request.

(2) Source Testing:

(a) All solid waste incinerators and infectious waste incinerators must be tested to demonstrate compliance with the standards in OAR 340-230-0100 through 340-230-0150;

(b) Source testing shall be conducted at the maximum design rate using waste that is representative of normal operation. If requested by the owner/operator, source testing may be performed at a lower rate, however, permit limits will be established based on the lower rate of operation;

(c) Unless otherwise specified by the Department, each incinerator shall be tested at start-up and annually thereafter for particulate, hydrogen chloride, sulfur dioxide, and carbon monoxide emissions.

(3) Hazardous or Toxic Air Contaminant Source Testing. The Department may at any time, conduct or require source testing and require access to information specific to the control, recovery, or release of hazardous or toxic air contaminants.

Notes

Or. Admin. Code § 340-230-0140

DEQ 9-1990, f. & cert. ef. 3-13-90; DEQ 4-1993, f. & cert. ef. 3-10-93; DEQ 14-1999, f. & cert. ef. 10-14-99, Renumbered from 340-025-0880

Stat. Auth.: ORS 183, ORS 468 & ORS 468A

Stats. Implemented: ORS 468A.025