Or. Admin. Code § 340-245-9050 - Colored Art Glass Manufacturing Facility Rules; Requirements That Apply To Tier 1 CAGMs
(1) No later than
October 1, 2016, if located within the Portland AQMA, and April 1, 2017, if
located outside the Portland AQMA, each Tier 1 CAGM must comply with subsection
(a) or (b) for each glassmaking furnace or group of glassmaking furnaces that
use raw material containing arsenic, cadmium, chromium, lead, manganese or
nickel:
(a) Install an emission control
device that meets the emission control device requirements in OAR
340-245-9070; or
(b) Request a permit condition that prohibits
the use of arsenic, cadmium, chromium, lead, manganese or nickel in the
glassmaking furnace or group of glassmaking furnaces, and comply with that
condition.
(2) No later
than January 1, 2017, if located within the Portland AQMA, and April 1, 2017,
if located outside the Portland AQMA, each Tier 1 CAGM must comply with
subsection (a) or (b) for each glassmaking furnace or group of glassmaking
furnaces that use raw material containing selenium:
(a) Install an emission control device that
meets the emission control device requirements in OAR
340-245-9070; or
(b) Request a permit condition that prohibits
the use of selenium in the glassmaking furnace or group of glassmaking
furnaces, and comply with that condition.
NOTE: This rule was moved verbatim from OAR 340-244-9050 and renumbered and amended.
Notes
Statutory/Other Authority: ORS 468.020, 468A.025 & 468A.040
Statutes/Other Implemented: 468A.025 & 468A.040
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.