Or. Admin. Code § 340-256-0420 - Emission Control System Inspection: Heavy-Duty Gasoline Motor Vehicle Emission Control Standards
This rule documents the standards not to be exceeded for heavy duty gasoline vehicle emission tests.
(1) CO idle emission values:
(a) 1975-1978 Model Year: 4.0%;
(b) 1979 and Newer Model Year without
catalyst: 3.0%;
(c) 1985 and Newer
Model Year with catalyst: 1.0%.
(2) Gross CO emissions exceed the applicable
model year CO standard by a factor of one and one-half (1.5).
(3) Hydrocarbon idle emission values:
(a) 1975-1978 Model Year: 500 PPM;
(b) 1979 and Newer Model Year without
catalyst: 350 PPM;
(c) 1985 and
Newer Model Year with catalyst: 220 PPM.
(4) Gross HC emissions exceed the applicable
model year HC standard by a factor of three (3).
(5) Visible emission must not occur during
the steady-state unloaded engine idle and raised rpm portion of the emission
test from either the vehicle's exhaust system or the engine
crankcase.
(6) The Director may
grant a waiver from standards listed in sections (1)-(4) for vehicle classes
that DEQ determines present prohibitive inspection problems meeting the listed
standards in sections (1) - (4) if DEQ deems the motor vehicle pollution system
otherwise meets the standards of this Division.
[NOTE: This rule is included in the State of Oregon Clean Air Act Implementation Plan that EQC adopted under OAR 340-200-0040.]
Notes
Statutory/Other Authority: ORS 468A.360
Statutes/Other Implemented: ORS 468A.360
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.