Or. Admin. Code § 629-043-0040 - Burning Permits

(1) Pursuant to ORS 477.515, holders of permits for burning must:

(a) Before burning, clear the area immediately around and above the burn site of material that may carry fire;

(b) When burning in a barrel or similar container, completely cover the container openings with a screen constructed of not less than 14-gauge wire and that has openings which are no larger than one-fourth inch in diameter;

(c) Not allow the uncontrolled spread of fire away from the permitted burn site;

(d) Not burn on a day when burning has been prohibited by the forester because of increased fire danger or because of air quality conditions;

(e) Not burn without complying with all conditions, hours and dates set forth on the permit; and

(f) Not burn without complying with the open burning prohibitions set forth in OAR 340-264-0050 to 340-264-0170.

(2) The requirements of this rule do not apply to prescribed burning conducted in compliance with ORS 477.013 and 477.552 to 477.562, OAR 629-043-0026(4) and 629-048-0001 to 629-048-0500.

(3) The forester may, in a written order, reduce or waive any requirement of this rule if:

(a) In the judgment of the forester, conditions so warrant; and

(b) The burning complies with the requirements of ORS 477.515, and any applicable portions of Chapter 468, Chapter 468A and OAR chapter 340 division 264.

Notes

Or. Admin. Code § 629-043-0040

FB 6, f. 5-9-60; FB 8-1986, f. & ef. 9-25-86; DOF 11-1998, f. & cert. ef. 8-13-98; DOF 4-2007, f. 12-31-07, cert. ef. 1-1-08; DOF 2-2017, f. 6-9-17, cert. ef. 7/1/2017

Stat. Auth.: ORS 477.013, 526.016 & 526.041

Stats. Implemented: ORS 477.013 & 477.515