Or. Admin. Code § 734-082-0020 - Width
Permits are required for widths more than eight feet six inches:
(1) Unless specifically stated
on the permit as authorized by ORS Chapter 818 or rule, overwidth permits will
not be valid if overwidth is caused by two or more items placed side by side or
overlapping, or for items that could be loaded at a legal width.
(2) Except as provided in section (3), items
joined (by spot weld, tack weld, bolting, or strapping, etc.) to facilitate
transport, shall be considered to be divisible loads and not eligible for
overwidth permits.
(3) Loads no
wider than 14 feet consisting of pre-assembled railroad track sections are
eligible for overwidth permits.
Notes
Statutory/Other Authority: ORS 184.619
Statutes/Other Implemented: ORS 818.210, 818.220 & 818.225
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
Permits are required for widths more than eight feet, six inches:
(1) Unless specifically stated on the permit as authorized by ORS Chapter 818 or rule, overwidth permits will not be valid if overwidth is caused by two or more items placed side by side or overlapping, or for items that could be loaded at a legal width.
(2) Except as provided in section (3), items joined (by spot weld, tack weld, bolting, or strapping, etc.) to facilitate transport , shall be considered to be divisible loads and not eligible for overwidth permits.
(3) Loads no wider than 14' consisting of pre-assembled railroad track sections are eligible for overwidth permits.
Notes
Stat. Auth.: ORS 184.616 & 184.619
Stats. Implemented: ORS 818.210, 818.220 & 818.225