Or. Admin. Code § 734-082-0050 - Load Length
(1) Variance permits are required for
non-divisible loads that exceed legal length specified in ORS Chapter
818.
(2) Overlength permits will
not be valid if overlength is caused by multiple items placed end to end, or
overlapping unless specifically stated on the permit as authorized by statute
or rule.
(3) Items joined (by spot
weld, tack weld, bolting, strapping, etc.) to facilitate transport, shall be
considered to be divisible loads and not eligible for overlength
permits.
Notes
Statutory/Other Authority: ORS 184.619 & 818.200
Statutes/Other Implemented: ORS 818.210, 818.220 & 818.225
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
(1) Variance permits are required for non-divisible loads that exceed legal length specified in ORS Chapter 818.
(2) Overlength permits will not be valid if overlength is caused by multiple items placed end to end, or overlapping unless specifically stated on the permit as authorized by statute or rule.
(3) Items joined (by spot weld, tack weld, bolting, strapping, etc.) to facilitate transport , shall be considered to be divisible loads and not eligible for overlength permits.
(4) Continuous trip permits for truck-tractor with semitrailer combinations may be issued for load length not in excess of 70 feet and overall length not in excess of 80 feet.
Notes
Stat. Auth.: ORS 184.616, 184.619 & 818.200
Stats. Implemented: ORS 818.210, 818.220 & 818.225