Or. Admin. Code § 735-046-0050 - Congressional Medal of Honor, Elected Official and Consular Corps Plates
(1) Requirements
and Qualifications. In addition to all other requirements for registration, an
applicant for Congressional Medal of Honor plates, elected official plates or
consular corps plates must submit to DMV an application for registration and
all applicable fees, including any fee required for the custom plate requested.
At the time of application, the applicant must be the registered owner of the
vehicle listed on the application and:
(a)
For Congressional Medal of Honor recipients, meet the qualifications for
issuance of Congressional Medal of Honor plates under ORS
805.103 and this rule;
(b) For elected officials, meet the
qualifications of ORS
805.220, and hold the office
specified on the application. DMV may contact the Secretary of State to verify
compliance with this subsection;
(c) For consular corps plates, provide proof
to DMV that the applicant is appointed by a foreign government as an honorary
consul and is acting in that capacity. Proof under this subsection is a copy of
the applicant's current Consular Identification Card issued by the U.S.
Department of State, Office of Protocol.
(2) For purposes of section (1) of this rule,
the annual custom plate fee set forth in ORS
805.250(2)(a)
for issuance or renewal of Congressional Medal of Honor plates is waived and is
not a required fee.
(3) Elected
official plates are assigned to a specific vehicle and - if requested by the
applicant - are issued in addition to the regular registration plates issued to
the vehicle. The fee for an elected official plate issued in addition to a
regular series plate is the plate manufacturing fee established under ORS
803.570. Elected official plates
may be transferred to another vehicle if:
(a)
The vehicle to which the plates are to be transferred is registered in the name
of the elected official who qualifies for the particular plate configuration;
and
(b) The applicant submits to
DMV a completed application that identifies the vehicle to which the elected
official plates are to be assigned.
(4) Consular corps plates are assigned to a
specific vehicle and may only be transferred to another vehicle under section
(5) of this rule.
(5) Plate
Transfer. In addition to all other requirements for transferring registration
plates, an applicant for a plate transfer must submit to DMV a completed,
signed application to transfer registration plates and all applicable fees. At
the time of transfer, the applicant must be the registered owner of the vehicle
listed on the application. There is no plate transfer fee for elected official
plates.
(6) Plate Configurations.
The following plate configurations are reserved as specified:
(a) For Congressional Medal of Honor
recipients: Except as provided in paragraph (B) of this subsection, the
applicant may choose the letter combination "MOH" or "CMH," which will be
followed by a single number from 1 to 9, to be designated by DMV;
(A) A total of 18 pairs of Congressional
Medal of Honor plates are reserved for issuance to qualified Congressional
Medal of Honor recipients.
(B) When
a Congressional Medal of Honor plate configuration is issued, it will be
removed from the list of available plates and will not be issued again. For
example, after plate configuration "CMH 1" is issued, that configuration is no
longer available. The next qualified applicant is issued the next available
plate number in numeric order.
(b) For elected officials:
(A) Governor: "GOVERNOR 1";
(B) Secretary of State: "SECRETARY OF STATE
2";
(C) State Treasurer: "STATE
TREASURER 3";
(D) President of the
Senate: "PRESIDENT OF THE SENATE 4";
(E) President pro tempore of the Senate:
"SENATE PRESIDENT PRO TEMPORE 4A";
(F) Speaker of the House of Representatives:
"SPEAKER OF THE HOUSE OF REPRESENTATIVES 5";
(G) Speaker pro tempore of the House:
"SPEAKER OF THE HOUSE PRO TEMPORE 5A";
(H) State Senators: "STATE SENATOR" followed
by the applicable Senate district number;
(I) State Representatives: "STATE REP."
followed by the applicable House district number;
(J) U.S. Senator: "U.S. SENATOR" followed by
the number 1 or 2, depending on seniority;
(K) U.S. Representative: "U.S. REP." followed
by the House District number; and
(c) For consular corps plates: "OFFICAL
CONSULAR CORPS" followed by a number assigned by DMV.
(7) In addition to the elected official plate
for the Governor under subsection (3)(b) of this rule, DMV will issue regular
series plates to the Governor upon request from the Governor's office. The fee
for a regular series plate issued under this section is the plate manufacturing
fee established under ORS
803.570.
(8) The plates must be removed from the
vehicle to which they are assigned when the person no longer qualifies for
elected official plates or consular corps plates because the term of office or
appointment expires, or the person otherwise ceases to act in the official
capacity required to qualify for the plates. After removing the plates from the
vehicle, the person may surrender the plates to DMV or retain the plates as a
souvenir.
Notes
Stat. Auth.: ORS 184.616, 184.619, 802.010, 805.103, 805.200, 805.205 & 805.220
Stats. Implemented: ORS 803.420, 803.530, 803.535, 805.103, 805.200, 805.220, 805.240, 805.242 & 805.250
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.