Or. Admin. Code § 735-100-0010 - Equipment Compliance and Approval
(1) The Automotive Manufacturers Equipment
Compliance Agency, Inc. (AMECA) is designated an approval authority for the
Transportation Safety Office of the Oregon Department of Transportation
(Transportation Safety).
(2) The
AMECA's Equipment Compliance Program may be used by manufacturers for verifying
their equipment items meet the appropriate Transportation Safety adopted
standards. This does not preclude other manufacturer self-certification methods
of federally regulated items.
(3)
AMECA's accredited testing laboratories shall be recognized as approved by
Transportation Safety.
(4) AMECA's
Notice of Equipment Compliance for an equipment item, or the showing of the
item on an AMECA's Compliance Listing shall be acceptable proof to
Transportation Safety that the item meets equipment standards. All equipment
must be tested to comply with standards adopted by Transportation Safety. This
does not preclude testing to more stringent standards.
(5) The review of manufacturer's test results
through the AMECA's program shall be an acceptable procedure to verify
equipment compliance to standards.
(6) Transportation Safety may request a
manufacturer's test results for conformance review, and may consider testing or
retesting at any time there is reason to believe an item does not meet
established standards.
(7)
Transportation Safety may request the testing laboratory name, address, contact
person and telephone number from the manufacturer to verify test procedures and
test results if there is reason to believe an item does not meet established
standards.
Notes
Statutory/Other Authority: ORS 184.619, 815.010, 815.030 & 816.010
Statutes/Other Implemented: ORS 815.010, 815.030 & 816.010
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.