Or. Admin. Code § 813-060-0032 - Manufactured Dwelling Park Projects
(1) To qualify as a Manufactured Dwelling
Park, the Project shall comply with the following standards and conditions:
(a) Site, design and licensing standards of
the local government;
(b)
Regulations of the Building Codes Division, State of Oregon, OAR
918-600-0010 to
918-600-0110;
(c) All manufactured
dwellings shall have skirting, unless the home is set on a ground level
foundation. If the manufactured dwelling is purchased after September 4, 1984,
the design, color and texture of the skirting shall appear to be an integral
part of the adjacent exterior wall of the manufactured dwelling;
(d) All manufactured dwellings purchased
after September 4, 1984, shall have a roof with a non-reflective surface at a
minimum slope of two inches in 12 inches (16 percent);
(e) The area occupied by the manufactured
dwelling and any accessory buildings (including porches, carports, etc.) shall
not exceed 40 percent of the lot area; and
(f) All manufactured dwellings shall be
installed in compliance with the State of Oregon, Building Codes Division
regulations. Installation inspections shall be completed by the Building Codes
Division, or by a city or county which has contracted to do the inspections. A
copy of the final inspection report shall be submitted to the Department
together with a copy of a certificate of occupancy.
(2) The Borrower shall establish rules for
the residents of the Project, to be a required part of each resident's lease.
The rules and lease shall be submitted for the Department's review and approval
as part of the proposal.
Notes
Stat. Auth.: ORS 456.555
Stats. Implemented: ORS 456.555 & 456.625
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.