Or. Admin. Code § 918-400-0390 - Apprentice Scope of Work

A person with an apprentice license issued under OAR 918-400-0385 must:

(1) Work consistent with the apprenticeship committee's requirements under ORS chapter 660 and these rules; and

(a) Engage only in cleaning, lubrication, painting, relamping fixtures, and replacing of comb plate teeth of existing installations with limited supervision after completing:

(A) At least 2,000 hours (12 months) of work experience;

(B) The appropriate related instruction for two periods; and

(C) Is evaluated and authorized to do this type of work by the apprenticeship committee; or

(b) The apprentice engages only in installation, alteration, maintenance, and repair with limited supervision after completing:

(A) 4,000 hours of work experience;

(B) The appropriate related classroom instruction; and

(C) Is evaluated and authorized by the committee.

(2) As apprentices progress through each phase, they may be authorized to participate in work processes of the preceding phase provided they have been evaluated and authorized by the apprenticeship committee to do the specific type of work.

(3) A person enrolled in a board-approved apprenticeship program, who has been issued an apprentice card by BOLI, shall be considered licensed under ORS 460.059.

Notes

Or. Admin. Code § 918-400-0390

BCD 21-2002(Temp), f. 8-30-02, cert. ef. 9-1-02 thru 2-27-03; BCD 34-2002, f. 12-20-02, cert. ef. 1-1-03; BCD 12-2004, f. 8-20-04, cert. ef. 10-1-04; BCD 10-2009, f. 12-30-09, cert. ef. 1-1-10

Stat. Auth.: ORS 460.059 & 660

Stats. Implemented: ORS 460.059, 460.085, & 479.630