(a)
Requirement. The owner or operator of a wood furniture
manufacturing operation shall keep records to demonstrate compliance with this
section and §§
129.101-
129.104,
129.106 and
129.107. The records shall be
maintained for at least 5 years.
(b)
Compliant coatings. The following records shall be maintained
to demonstrate compliance with §
129.102 (relating to emission
standards).
(1) A certified product data sheet
for each coating and strippable spray booth coating subject to the emission
limits of §
129.102.
(2) The VOC content as applied, lbs VOC/lb
solids (kg VOC/kg solids), of each coating and strippable spray booth coating
subject to the emission limits of §
129.102, and copies of data sheets
documenting how the as applied values were determined.
(c)
Continuous coaters. The
owner or operator of a facility subject to the emission limits of §
129.102 that is complying through
the procedures specified in §
129.104(a)(1)
(relating to compliance procedures and monitoring requirements) and is applying
sealers, topcoats, or both, using continuous coaters shall maintain the records
required by subsections (a) and (b) and records of the following:
(1) Solvent and coating additions to the
continuous coater reservoir.
(2)
Viscosity measurements.
(d)
Control systems. The
owner or operator of a facility complying through the procedures in §
129.104(a)(2) by
using a control system shall maintain the following records:
(1) Copies of the calculations to support the
equivalency of using a control system, as well as the data that are necessary
to support the calculation of C and E in §
129.104(a)(2)(i)
and O in §
129.104(a)(2)(iii).
(2) Records of the daily average value of
each continuously monitored parameter for each operating day. If all recorded
values for a monitored parameter are within the range established during the
initial performance test, the owner or operator may record that all values were
within the range rather than calculating and recording an average for that day.
(e)
Work practice
implementation plan. The owner or operator of a facility subject to
the work practice standards of §
129.103 (relating to work practice
standards) shall maintain onsite copies of the work practice implementation
plan and all records associated with fulfilling the requirements of that plan,
including:
(1) Records demonstrating that the
operator training program is in place.
(2) Records maintained in accordance with the
leak inspection and maintenance plan.
(3) Records associated with the cleaning and
washoff solvent accounting system.
(4) Records associated with the limitation on
the use of conventional air spray guns showing total coating usage and the
percentage of coatings applied with conventional air spray guns for each
semiannual reporting period.
(5)
Records showing the VOC content of compounds used for cleaning booth
components, except for solvent used to clean conveyors, continuous coaters and
their enclosures or metal filters.
(6) Copies of logs and other documentation
developed to demonstrate that the other provisions of the work practice
implementation plan are followed.
(f) In addition to the recordkeeping
requirements of subsection (a), the owner or operator of a facility that
complies with §
129.103 or §
129.104(a)(1)
shall maintain a copy of the compliance certifications submitted in accordance
with §
129.106(b)
(relating to reporting requirements) for each semiannual period following the
compliance date.
(g) The owner or
operator of a facility shall maintain a copy of the other information submitted
with the initial status report required by §
129.106(a) and
the semiannual reports required by §
129.106(b).
