25 Pa. Code § 145.145 - Compliance demonstration and reporting requirements

(a) By October 31, 2011, and each year thereafter, the owner or operator of a Portland cement kiln subject to § 145.143(b)(2) (relating to standard requirements) shall submit a written report to the Department, in a format approved by the Department, which includes the following:

(1) The difference between the actual NOx emissions from the kiln during the interval from May 1 through September 30 and the allowable emissions for that period.

(2) The calculations used to determine the difference in emissions, including the CEMS data and clinker production data used to show compliance with the allowable emission limits in § 145.143(b)(2). The clinker production data must consist of the quantity of clinker, in tons, produced per day for each kiln.

(b) The owner or operator of a Portland cement kiln shall demonstrate compliance with the standard requirements in § 145.143(b)(2) on one of the following:

(1) A kiln-by-kiln basis.

(2) A facility-wide basis.

(3) A system-wide basis.

Notes

25 Pa. Code § 145.145

The provisions of this § 145.145 adopted June 18, 2010, effective 6/19/2010, 40 Pa.B. 3346.

The provisions of this § 145.145 issued under section 5(a)(1) of the Air Pollution Control Act (35 P.S. § 4005(a)(1)).

This section cited in 25 Pa. Code § 129.97 (relating to presumptive RACT requirements, RACT emission limitations and petition for alternative compliance schedule); and 25 Pa. Code § 129.112 (relating to presumptive RACT requirements, RACT emission limitations and petition for alternative compliance schedule).