(a) In addition to the requirements incorporated by reference in 40 CFR Part
273 (relating to standards for universal waste management), this chapter applies to persons managing oil-based finishes as defined in §
266b.3 (relating to definitions), except those listed in subsection (b).
(b) This section does not apply to persons managing the following oil-based finishes:
(1) Oil-based finishes that are not yet wastes under Chapter 261a (relating to identification and listing of hazardous waste). Subsections (c) and (d) describe when oil-based finishes become wastes.
(2) Oil-based finishes that are not hazardous waste. An oil-based finish is a hazardous waste if it exhibits one or more of the characteristics identified in 40 CFR Part
261, Subpart C (relating to characteristics of hazardous waste).
(c) Used oil-based finishes become a waste on the date they are discarded or sent for reclamation.
(d) Unused oil-based finishes become a waste on the date the handler discards them.
Notes
The
provisions of this § 266b.4 adopted January 9, 2009,
effective 1/10/2009, 39 Pa.B.
201.
The provisions of this § 266b.4 adopted under sections 105,
402 and 501 of the Solid Waste Management Act (35 P. S. §§
6018.105,
6018.402 and
6018.501); sections 303 and
305(e)(2) of the Hazardous Sites Cleanup Act (35 P. S. §§
6020.303 and
6020.305(e)(2)); section 5,
402 and 501 of The Clean Streams Law (35 P. S. §§
691.5,
691.402 and
691.501); and section 1920-A
of The Administrative Code of 1929 (71 P. S. §§
510-20).
