25 Pa. Code § 273.113 - Maps and related information
(a) An application shall contain a
topographic map, on a scale of 1 inch equals no more than 200 feet with 10-foot
maximum contour intervals, including necessary narrative descriptions, which
shows the following:
(1) The boundaries and
names of present owners of record of land, both surface and subsurface, and
including easements, rights-of-way and other property interests, for the
proposed permit area and adjacent area; the boundaries of the land within the
proposed permit area; and a description of title, deed or usage restrictions
affecting the proposed permit area.
(2) The boundaries of the land to be affected
during the estimated total life of the proposed operation, including the
boundaries of areas that will be affected in each sequence of landfilling
activity and boundaries of areas that will be used for impoundments.
(3) The location of the areas on and off the
permit area which are proposed to be excavated to obtain earthen material for
the construction of the facility, for cover material and for other construction
purposes.
(4) The location and name
of public and private water sources within 1/2 mile of the proposed facility.
If more than 50 wells are located within the 1/2-mile radius, the applicant may
identify only the closest wells in each direction and generally describe the
location and number of wells further away.
(5) The location, name and elevation of
surface water bodies, such as springs, streams, lakes, ponds, wetlands,
constructed or natural drains and irrigation ditches within 1/4 mile of the
proposed facility.
(6) The location
of gas and oil wells-active and inactive-surface and underground coal and
noncoal mines-active and inactive-coal seams to a depth of 500 feet, mine spoil
piles, dumps, dams, embankments and mine pool discharge points within 1/4 mile
of the proposed facility.
(7) The
location of rights-of-way for high tension power lines, pipelines, railroads
and public and private roads within 1/4 mile of the proposed
facility.
(8) The location of
buildings currently in use within 1/4 mile of the proposed facility.
(9) If solid waste disposal or processing has
previously taken place within 1/4 mile of the proposed facility, the names of
the owners or operators, or both, of the facility, the type of solid waste
processed or disposed, and if applicable, cross sections indicating the
interface details between areas previously filled and areas to be
filled.
(10) The anticipated
location of water quality monitoring points.
(11) The boundaries of land within the
proposed permit area and adjacent areas identified in §
273.202 (relating to areas where
municipal waste landfills are prohibited).
(12) The elevation and location of test
borings and core samplings taken under §
273.115 (relating to geology and
groundwater description), and the location of test pits or excavations taken
under §
273.117 (relating to soil
description).
(13) The
municipalities in which the permit area is proposed to be located.
(14) The location of sinkholes, fractures,
fracture traces, outcrops, lineaments and mine pools in the proposed permit
area and adjacent area.
(15) The
location of water discharges into a surface body of water in the proposed
permit area and adjacent area.
(16)
The location of 100-year floodplain boundaries in the proposed permit area and
adjacent area.
(b) An
application shall contain a topographic map showing the location and name of
public water sources within 3 miles downstream or downgradient from the
proposed facility. The map shall be on a scale of 1 inch equals no more than
500 feet with 10-foot maximum contour intervals, including necessary narrative
descriptions.
(c) A different scale
for the topographic map required in subsection (a) may be used if approved in
writing by the Department.
Notes
This section cited in 25 Pa. Code § 273.111 (relating to general).
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.