25 Pa. Code § 87.46 - Surface water information
(a) An
application shall contain a description of the surface waters, including the
name of the watershed which will receive water discharges, the location of
surface water bodies, such as streams, lakes, ponds and deep mine discharges
and seeps, the location of a water discharge into a surface body of water and
descriptions of surface drainage systems sufficient to identify, in detail, the
seasonal variations in water quantity and quality within the proposed permit
and adjacent areas.
(b) Surface
water information shall include the following:
(1) The surface elevations and rate of flow
of springs, seeps and deep mine discharges located within and adjacent to the
proposed permit area.
(2) Minimum,
maximum and average discharge conditions which identify critical low flow and
peak discharge rates or streams sufficient to identify seasonal
variations.
(3) Water quality data
to identify the characteristics of surface waters in, discharging into, or
which will receive flows from surface water or groundwater from the proposed
permit area, sufficient to identify seasonal variations, showing the following:
(i) Total dissolved solids in milligrams per
liter or specific conductance in micromhos per centimeter corrected to
25°C.
(ii) Total suspended
solids in milligrams per liter.
(iii) Acidity in milligrams per
liter.
(iv) pH in standard
units.
(v) Total iron in milligrams
per liter.
(vi) Total manganese in
milligrams per liter.
(vii)
Alkalinity in milligrams per liter.
(viii) Sulfates in milligrams per
liter.
(ix) Total aluminum in
milligrams per liter.
(x) Other
information as the Department determines relevant.
Notes
The provisions of this § 87.46 amended under the Surface Mining Conservation and Reclamation Act (52 P.S. §§ 1396.1-1396.19a); The Clean Streams Law (35 P.S. §§ 691.1-691.1001); and section 1920-A of The Administrative Code of 1929 (71 P.S. § 510-20).
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.