34 Pa. Code § 405.2 - Standards
(a) The following
standards are adopted as part of the Uniform Construction Code and apply to the
listed type of elevator or other lifting device. Other authorities referenced
in the standards are adopted if the authority is not excluded in subsection
(b):
(1) "ASME A17.1-2000" with "A17.1a-2002"
addenda:
(i) Part 1 (General).
(ii) Part 2 (Electric elevators).
(iii) Part 3 (Hydraulic elevators).
(iv) Part 4 (Elevators with other types of
driving machines).
(v) Part 5
(Special application elevators).
(vi) Part 6 (Escalators and moving
walks).
(vii) Part 7 (Dumbwaiters
and material lifts).
(viii) Part 8
(General requirements).
(ix) Part 9
(Standard codes and specifications).
(2) "ASME B20.1-2000" for vertical and
inclined reciprocating conveyors without automatic transfer devices.
(3) "ASME A90.1-1997" including "A90.1a-1999"
and "A90.1b-2001" addenda for belt man-lifts.
(4) "ANSI B77.1-2017" for passenger ropeways,
aerial tramways, aerial lifts, surface lifts, tows and conveyors.
(5) "ASME A18.1-1999" including
"A.18.1a-2001" addenda for vertical and inclined wheelchair lifts and stairway
lifts. Testing under sections 10.3.2 and 10.3.3 shall comply with §
405.8 (relating to periodic test
results).
(6) Electric wiring and
apparatus shall comply with the "ICC Electrical Code."
(b) The following sections of "ASME
A17.1-2000" with "A17.1b-2002" addenda are not adopted as the Uniform
Construction Code:
(1) Section
5.3 (Private residence
elevators).
(2) Section
5.4 (Private residence inclined
elevators).
(3) Section
5.8 (Shipboard
elevators).
(4) Section 5.9 (Mine
elevators).
(5) Section 7.7
(Automatic transfer devices).
(6)
Section 7.8 (Power dumbwaiter with automatic transfer devices).
(7) Section 7.9 (Electric material lifts with
automatic transfer devices).
(8)
Section 7.10 (Hydraulic material lifts with automatic transfer
devices).
(9) Section
7.11 (Material lifts with obscured
transfer devices).
(10) Section
8.6.7.3 (Private residence elevator).
(11) Section 8.6.7.4 (Private residence
inclined elevators).
(12) Section
8.6.7.8 (Shipboard elevators).
(13)
Section 8.6.7.9 (Mine elevators).
(14) Section 8.6.9.2 (Material lifts and
dumbwaiters with automatic transfer devices).
(15) Section 8.7.5.3 (Private residence
elevators).
(16) Section 8.7.5.4
(Private residence inclined elevators).
(17) Section 8.7.5.8 (Shipboard
elevators).
(18) Section 8.7.5.9
(Mine elevators).
(19) Section
8.7.7.3 (Material lifts and dumbwaiters with automatic transfer
devices).
(20) Section 8.10.5.2
(Private residence elevators and lifts).
(21) Section 8.10.5.5 (Material lifts and
dumbwaiters with automatic transfer devices).
(22) Section 8.10.5.8 (Shipboard
elevators).
(23) Section 8.11.5.2
(Private residence elevators and lifts).
(24) Section 8.11.5.5 (Material lifts and
dumbwaiters with automatic transfer devices).
(25) Section 8.11.5.8 (Shipboard
elevators).
(c) The
following portions of "ASME B20.1-2000" are not adopted as the Uniform
Construction Code:
(1) Section 3
(Intent).
(2) Section 5.14 (Hoppers
and chutes).
(3) Section
6.1 (Belt conveyors-fixed in
place).
(4) Section
6.2 (Bucket conveyors).
(5) Section
6.3 (Chain conveyors).
(6) Section
6.4 (En masse
conveyors).
(7) Section 6.5 (Flight
and apron conveyors-bulk material).
(8) Section 6.7 (Live roller conveyors-belt
or chain driven).
(9) Section 6.8
(Mobile conveyors).
(10) Section
6.9 (Portable conveyors, extendible belt conveyors and car
unloaders).
(11) Section 6.10
(Pusher bar conveyors).
(12)
Section 6.11 (Roller and wheel
conveyors).
(13) Section
6.12 (Screw conveyors).
(14) Section
6.13 (Shuttle conveyors, belt
trippers and transfer cars).
(15)
Section 6.14 (Skip hoists-bulk
materials).
(16) Section
6.15 (Slat conveyors and roller
slat conveyors).
(17) Section
6.16 (Suspended vertical tray
conveyors).
(18) Section
6.17 (Tow conveyors-in the
floor).
(19) Section
6.18 (Trolley conveyors and power
and free conveyors).
(20) Section
6.19 (Vertical articulated
conveyors).
(21) Section
6.20 (Vertical chain opposed shelf
type conveyors).
(d) The
following portions of "ASME A18.1-1999" with "A18.1a-2001" addenda are not
adopted as the Uniform Construction Code:
(1)
Part V (Private residence vertical platform lifts).
(2) Part VI (Private residence inclined
platform lifts).
(3) Part VII
(Private residence incline stairway chairlifts).
(e) This chapter applies when there is a
conflict with a code or standard related to elevators or lifting
devices.
Notes
The provisions of this § 405.2 amended under sections 301, 302 and 304 of the Pennsylvania Construction Code (35 P.S. §§ 7210.301, 7210.302 and 7210.304).
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.