34 Pa. Code § 43.28 - Lighting
(a) While work is
in progress, tunnels, stairways, ladderways, and all places on the surface
where work is being conducted, shall be properly lighted. In shafts more than
100 feet deep the shaft below that point shall be lighted.
(b) All machinery in the area where persons
are likely to be working or moving about shall be lighted so that the moving
parts of the machinery are clearly distinguished.
(c) The exterior of the sockets of all fixed
incandescent lamps, installed after June 13, 1922, shall be entirely
nonmetallic.
(d) Lamp cord, when
used for temporary lighting connections, shall have extra heavy insulation.
Single portable lights shall be protected by a wire cage large enough to
enclose both lamp and socket, and shall be provided with a handle to which the
light and socket shall be firmly attached and through which the leading-in
wires shall be carried.
(e)
Incandescent lamps shall be placed so that they do not come in contact with
combustible material, and so that an adequate circulation of air may take place
on all sides of them.
(f) In all
underground stations where a failure of electric light is likely to cause
danger, lamps or other proper lights shall be kept ready for use.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.