52 Pa. Code § 57.22 - Request tests and fees
(a)
Tests by the public utility. A public utility shall make a
test of the accuracy of registration of a service meter upon the written
request of the customer for whom the meter is installed upon payment of the fee
specified in this section. If a customer desires either personally or by a
representative to witness the testing of a meter, the customer may require the
seal of the meter to be broken only in the customer's presence or that of a
representative. If the meter tested upon request is found to be accurate within
the limits specified in §
§
57.20 and
57.21 (relating to watthour meter
testing; and demand meter testing), the fee shall be retained by the public
utility. If not so found, the cost shall be borne by the public utility
furnishing the service and the fee paid by the customer shall be refunded. A
report of the test shall be made to the customer.
(b)
Tests by the Commission.
If service meter test is to be made by the Commission upon written request and
payment of the fee by the customer, as specified in this section, the public
utility owning the meter shall be notified that a test is to be made and shall
have a representative present to open the meter, assist in the test and adjust
and seal the meter after the test. If a tested meter is found to be accurate
within the limits specified in §
§
57.20 and
57.21, the fee paid for the test
shall be retained by the Commission. If not so found, the fee shall be refunded
to the customer and the cost of the test shall be borne by the public utility
furnishing the service. A public utility may apply in writing for a test of a
meter and, upon payment of the fee specified for that class of meter, the
Commission will make the test and furnish the public utility with a record of
the results.
(c)
Meter
testing fees. Meter testing fees for watthour and demand meters shall
be as follows:
(1) Direct current and
single-phase self-contained watthour meters operating on 600 volts or less
shall be $20.
(2) Single-phase
transformer-rated and polyphase watthour meters with or without instrument
transformers shall be $38.
(3) In
addition to charges associated with paragraphs (1) and (2) there shall be an
additional charge of $11 for block interval or thermal demand registers and
separate demand recorders.
Notes
The provisions of this § 57.22 amended under the Public Utility Code, 66 Pa.C.S. § § 501, 1501 and 1504.
This section cited in 52 Pa. Code § 57.254 (relating to advanced meter standards).
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.