16 Tex. Admin. Code § 12.526 - Use of Explosives: General Requirements
(a) This section and §§
12.527-12.530 of this title (relating to
Use of Explosives) apply only to surface blasting activities incident to
underground mining, including, but not limited to, initial rounds of slopes and
shafts.
(b) Each operator shall
comply with all applicable state and federal laws and regulations in the use of
explosives.
(c) All surface
blasting operations incident to underground mining shall be conducted by
experienced, trained, and competent persons who understand the hazards
involved. A blaster and at least one other person shall be present at the
firing of a blast. Each person responsible for blasting operations shall
possess a valid certification as required by §§
12.700-12.710 of this title (relating to
Training, Examination, and Certification of Blasters) and:
(1) be familiar with the site-specific
performance standards; and
(2) give
direction and on-the-job training to persons who are not certified and who are
assigned to the blasting crew to assist in the use of explosives.
(d) Blast-design requirements
shall include the following:
(1) the operator
shall submit to the Commission an anticipated blast design if blasting
operations will be conducted within:
(A)
1,000 feet of any building used as a dwelling, public building, school, church,
hospital, nursing facility, or community or institutional building outside the
permit area; or
(B) 500 feet of
facilities including, but not limited to, disposal wells, petroleum or gas
storage facilities, active or abandoned underground mines, fluid-transmission
pipelines, gas or oil-collection lines, or water and sewage lines;
(2) the blast design may be
presented as part of a permit application or at a time, before the blast,
approved by the Commission;
(3) the
blast design shall contain sketches of the drill patterns, delay periods, and
decking and shall indicate the type and amount of explosives to be used,
critical dimensions, and the location and general descriptions of structures to
be protected, as well as a discussion of design factors to be used, which
protect the public and meet the applicable airblast, flyrock, and
ground-vibration standards in §
12.528 of this title (relating to
Use of Explosive: Control of Adverse Effects);
(4) the blast design shall be prepared and
signed by a certified blaster; and
(5) the Commission may require changes to the
design submitted.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.