16 Tex. Admin. Code § 14.2053 - Manufacturer's Nameplate and Markings on ASME Containers
(a) In addition to NFPA 52 §13.3.16 and
NFPA 59A §13.3.15, LNG shall not be introduced into any ASME container
unless the container is equipped with an original nameplate or at least one of
the following nameplates permanently attached to the container.
(1) A duplicate nameplate is an additional
ASME container nameplate issued by the original manufacturer with duplicate
information as the original nameplate and clearly marked as a duplicate
nameplate, but installed in a remote location.
(2) A modification (or alteration) nameplate
is a nameplate issued and affixed by an ASME Code facility including only
partial information applicable to a modification or alteration performed on
that container.
(3) A replacement
nameplate is a nameplate including the identical information as the original
nameplate and identified as a replacement nameplate, but issued and affixed by
the original manufacturer or its successor company or companies when the
original nameplate is lost or illegible.
(b) AFS may remove a container from LNG
service or require ASME acceptance of a container at any time if AFS determines
that the nameplate, in any form defined in subsection (a) of this section, is
loose, unreadable, or detached, or if it appears to be tampered with or damaged
in any way and does not contain at a minimum the items defined by NFPA as
applicable.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.