16 Tex. Admin. Code § 65.70 - Texas Boiler Numbers-Required

(a) Each boiler must be identified with a single unique department-issued identification number displayed on a corrosion-resistant tag or decal and located on the boiler next to the ASME name plate. The decal or tag must be attached to the boiler during the first inspection and remain on the boiler for the life of the equipment.

(b) After the initial issuance of an identification number, that number may not be reassigned or reused.

(c) All correspondence and inspection reports must reference the boiler identification tag number.

(d) On request by the department, the inspector must report to the department regarding the issuance and disposal of all tags issued to the inspector.

Notes

16 Tex. Admin. Code § 65.70

The provisions of this §65.70 adopted to be effective November 15, 1989, 14 TexReg 5783; amended to be effective October 20, 1992, 17 TexReg 6896; amended to be effective April 19, 1994, 19 TexReg 2383; amended to be effective December 1, 2003, 28 TexReg 10452; amended to be effective December 8, 2005, 30 TexReg 8061; amended to be effective September 1, 2006, 31 TexReg 6717; amended to be effective December 1, 2007, 32 TexReg 8476; Adopted by Texas Register, Volume 40, Number 22, May 29, 2015, TexReg 3128, eff. 6/15/2015; Amended by Texas Register, Volume 49, Number 47, November 22, 2024, TexReg 9517, eff. 12/1/2024