16 Tex. Admin. Code § 74.50 - Reporting Requirements - Owner
(a) To
obtain a certificate of compliance, the owner must submit to the department
within 30 days of the equipment inspection date the following items:
(1) the application for certificate of
compliance;
(2) a copy of the
inspection reports for each unit of equipment;
(3) written documentation to verify that all
violations of the applicable ASME Safety codes or ASCE standards as adopted in
§ 74.100, cited on the inspection report, are in compliance with
§74.66(6)(A) - (C);
(4) any
application(s) for delay or waiver if applicable; and
(5) all applicable fees.
(b) The owner must notify the department, in
writing and within thirty (30) days, of equipment that has been placed out of
service. The equipment must be placed out of service in accordance with the
definition in ASME Code A17.1, "installation placed out of service".
(c) The owner must notify the department, in
writing and within thirty (30) days, of an elevator that has had alterations
converting the equipment to a material lift. The conversion shall comply with
the applicable sections of ASME Code A17.1.
(d) The owner must notify the department, in
writing and within thirty (30) days, of a material lift that has had
alterations converting the equipment to an elevator. The elevator must be
inspected and brought into compliance with ASME Code A17.1 as a new
installation.
(e) When a delay has
been approved, the owner must notify the department, in writing within thirty
(30) days of the date of correction.
(f) Within thirty (30) days of the date the
equipment has become an Installation removed from service, the owner must
notify the department by submitting a completed Inspection Report, including
the applicable fee required by §74.80.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.