28 Tex. Admin. Code § 34.520 - Service Tags
(a) After any service,
the licensee must complete a service tag in detail, indicating all work that
done, and then attach the tag to the portable or fixed system in such a
position as to permit convenient inspection and not hamper its actuation or
operation. The signature of the licensee on the service tag certifies that the
service performed complies with requirements of law.
(b) A new service tag, yellow tag or red tag,
as applicable, must be attached each time service is performed.
(c) Service tags must bear the following
information in the format of the tag shown in subsection (g) of this section:
(1) "DO NOT REMOVE BY ORDER OF THE STATE FIRE
MARSHAL" (all capital letters, at least 10-point boldface type);
(2) firm's name, address, and telephone
number;
(3) firm's
certificate-of-registration number;
(4) licensee's name and license
number;
(5) licensee's signature (a
stamped signature is prohibited);
(6) month and year (to be punched);
(7) type of work (to be punched);
(8) service performed;
(9) name and address of owner or occupant;
and
(10) extinguisher type, size,
and location.
(d) Tags
must be 5-1/4 inches in height and 2-5/8 inches in width. Service tags must not
be red in color.
(e) Tags may be
printed and established for any five-year period.
(f) A service tag may be removed only by an
authorized employee of a registered firm, an employee of the state fire
marshal's office, or an authorized representative of a governmental agency with
regulatory authority.
(g) Service
tag:
(h)
Adhesive label type tags are permitted. The label must bear all information
required by subsection (c) of this section.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.