28 Tex. Admin. Code § 5.4608 - Certification by TDI-Employed Windstorm Inspectors
This section describes the procedure for the certification of ongoing improvements to certain components inspected by TDI-employed inspectors.
(1) Eligible
components.
(A) TDI-employed inspectors may
inspect on certain alterations and repairs (including reroofs) on components
such as:
(i) roofs;
(ii) exterior wall coverings;
(iii) exterior doors;
(iv) windows;
(v) skylights;
(vi) garage doors; and
(vii) devices protecting exterior openings
from windborne debris;
(B) TDI-employed inspectors may inspect
components of the kind described in subparagraph (A) of this paragraph for
which TDI has received the following information:
(i) the physical address (including street,
street number, city, county, and ZIP code);
(ii) the wind zone location;
(iii) the type of structure the improvement
is or is a part of, including the structure's name or number, and number of
units, if applicable;
(iv) the
subject of the inspection (for example, entire structure, addition, alteration,
or repair);
(v) the name and
contact information of the builder or contractor making the
improvement;
(vi) the storm code,
if applicable;
(vii) the date
construction of the improvement began;
(viii) the date of application for the
Certificate of Compliance for the improvement;
(ix) the name of the person submitting the
application for the certificate of compliance for the improvement;
(x) the owner's name and contact
information;
(xi) whether the
structure is located inside or outside city limits; and
(xii) whether the structure is in a Coastal
Barrier Resource Zone.
(2) Application for Certificate of
Compliance, Form WPI-1. TDI will make available on its website the Application
for Certificate of Compliance, Form WPI-1, on which the information required by
paragraph (1)(B) of this section may be provided.
(3) Verification of compliance or
noncompliance. After inspecting the improvement, the TDI-employed inspector
will document the following information:
(A)
the information in paragraph (1)(B)(i) - (vi) of this section;
(B) whether the improvement meets the
applicable windstorm building code standard;
(C) the dates and times the improvement was
inspected;
(D) the length of the
inspection or inspections;
(E) the
inspection number;
(F) the
structure's roof pitch;
(G)
component and cladding loads;
(H)
the structure's mean roof height;
(I) roof decking information;
(J) the field office performing the
inspection;
(K) the application
number from TDI; and
(L)
comments.
(4) Field Form,
Form WPI-7, effective January 1, 2017. TDI will use the Field Form, Form WPI-7,
on which TDI-employed inspectors will provide the information in paragraph (3)
of this section.
(5) Certification.
If TDI determines that the ongoing improvement meets the windstorm building
code standards, TDI will issue a form with the following information:
(A) the information in paragraph (1)(B)(i) -
(iv) of this section;
(B) the
building code standard and applicable wind load standard with which the
improvement complies;
(C) the date
construction of the improvement began;
(D) whether the occupancy type is considered
residential, commercial, agricultural, or religious;
(E) the certification date;
(F) TDI's certification number; and
(G) the type of
inspector.
(6)
Certificate of Compliance, Form WPI-8, January 1, 2017. When appropriate, TDI
will issue the Certificate of Compliance, Form WPI-8, with the information in
paragraph (5) of this section.
(7)
Availability of inspection results. TDI will make the results of inspections
under this section available to builders, contractors, and owners.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.