30 Tex. Admin. Code § 112.8 - Allowable Emission Rates from Solid Fossil Fuel-Fired Steam Generators
(a) Except as provided in subsection (b) of
this section, no person may cause, suffer, allow, or permit emissions of sulfur
dioxide (SO[sub]2[/sub]) from any solid fossil fuel-fired steam generator to
exceed 3.0 pounds per million Btu (MMBtu) heat input averaged over a three-hour
period.
(b) No person may cause,
suffer, allow, or permit emissions of SO[sub]2[/sub] from any solid fossil
fuel-fired steam generator located in Milam County, which began operation prior
to January 1, 1955, to exceed 4.0 pounds per MMBtu heat input averaged over a
three-hour period.
(c) Except as
provided in subsection (d) of this section, beginning September 30, 1994, solid
fossil fuel-fired steam generators of greater than 250 MMBtu heat input per
hour which are equipped with SO[sub]2[/sub] control equipment shall be equipped
with a continuous emissions monitoring system (CEMS) for SO[sub]2[/sub]. The
CEMS shall be installed, calibrated, and operated as specified in 40 Code of
Federal Regulations Part 51, Appendix P, hereby incorporated by
reference.
(d) In lieu of the
requirements of subsection (c) of this section, beginning September 30, 1994,
sources subject to the Federal Clean Air Act, §412(c) as amended in 1990
shall meet the requirements of §412(c) and the regulations promulgated
thereunder.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.