Utah Admin. Code R156-11a-805 - Approved Nail Technician Apprenticeship Requirements
Under Subsection 58-11a-102(6), the requirements for an approved nail technician apprenticeship include the following:
(1)
(a) under Subsections
58-11a-306(6)(b)(ii) and
(iii), an instructor shall provide one-on-one
direct supervision of a single apprentice during the apprenticeship program or
one-on-two direct supervision to two apprentices during the apprenticeship
program, but this does not preclude an instructor from having more than two
apprentices; and
(b) if an
instructor has more than two apprentices:
(i)
the instructor may not simultaneously supervise more than two apprentices;
and
(ii) the same hour or hours of
instruction may not be credited toward more than two
apprentices;
(2) the apprentice shall be registered with
the Division by submitting a form prescribed by the Division;
(3) the instructor shall be approved by the
Division for the apprenticeship, but the instructor may not have had any
disciplinary action in the preceding three years;
(4) there shall be a conspicuous sign near
the workstation of the apprentice stating, "Apprentice in Training";
(5)
(a) the
instructor and apprentice shall keep a daily record that documents the total
number of hours of training, which shall include:
(i) the hours of theory
instruction;
(ii) the hours of
practical instruction; and
(iii)
the number and type of client services performed, and other services performed;
and
(b) the daily record
shall be immediately available to the Division upon request;
(6) a complete set of nail
technician texts shall be available to the apprentice;
(7) an apprentice may be compensated for
services performed;
(8) the
instructor shall provide training and technical instruction of 375 hours using
the curriculum defined in Section
R156-11a-704;
(9) the instructor shall limit the training
of the apprentice to not more than 40 hours per week and not more than five
days out of every seven consecutive days;
(10) an apprentice may not perform work on
the public until the apprentice has received at least 10% of the hours of
technical training, with at least a portion of that time devoted to each of the
subjects in Section R156-11a-704;
(11) any hours obtained while enrolled in a
school of nail technology or cosmetology/barbering may not be used to satisfy
the required 375 hours of apprentice training; and
(12) if an apprentice completes the
apprenticeship and fails the NIC Nail Technology Theory Examination or NIC Nail
Technology Practical Examination three times, the apprentice and instructor
shall:
(a) meet with the Board at the next
appropriate Board meeting;
(b)
explain to the Board why the apprentice is not able to pass the examination;
and
(c) provide to the Board a plan
of study in the appropriate subject matter to assist the apprentice in passing
the examination.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.