Utah Admin. Code R307-352-4 - VOC Content Limits

(1) Operations that use aerosol coating products are exempt.
(2) No owner or operator shall apply coatings with a VOC content greater than the amounts specified in Table 1, unless the owner or operator uses an add-on control device as specified in R307-352-6.

TABLE 1

METAL CONTAINER AND CLOSURE COIL COATING LIMITATIONS (values in pounds VOC per gallon of coating, minus water and exempt solvents (compounds not classified as VOC as defined in R307-101-2), as applied)

Coating Category VOC

Content Limits (lb/gal)

CANS

Sheet basecoat (interior and exterior) and overvarnish

1.9

Two-piece can exterior basecoat, overvarnish, and end coating

2.1

Interior body spray

Two-piece cans

3.5

Three-piece cans

3.0

Three-piece can side seam spray

5.5

End sealing compound: Food cans, non-food cans, and beverage cans

0.1

Exterior body spray

3.5

PAILS AND LIDS

Body spray

Reconditioned interior

4.2

Reconditioned exterior

3.5

New interior

3.5

New exterior

2.8

End sealing compound

0.5

Inks, all applications

2.5

Coil

Coil coating

1.7

Notes

Utah Admin. Code R307-352-4
Amended by Utah State Bulletin Number 2014-24, effective 12/1/2014 Amended by Utah State Bulletin Number 2018-1, effective 12/6/2017

State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.


No prior version found.