Utah Admin. Code R307-354-5 - VOC Content Limits
No owner or operator shall apply coatings with a VOC content greater than the amounts specified in Table 1, unless the owner or operator uses an add-on Control device as specified in R307-354-7.
TABLE 1
AUTOMOTIVE REFINISHING VOC LIMITS (values in pounds of VOC per gallon of coating, minus water and exempt solvent (conpounds not defined as VOC in R307-101-2), as applied)
| Coating Category | VOC Content Limits (lb/gal) |
| Adhesion Promoter | 4.5 |
| Clear Coating | 2.1 |
| Col or Coating | 3.5 |
| Multi-color Coating | 5.7 |
| Pretreatment Coating | 5.5 |
| Primer | 2.1 |
| Primer Sealer | 2.1 |
| Single-stage Coating | 2.8 |
| Temporary Protective Coating | 0.5 |
| Truck Bed Liner Coating | 2.6 |
| Underbody Coating | 3.6 |
| Uniform Finish Coating | 4.5 |
| Any Other Coating Type | 2.1 |
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.