Utah Admin. Code R315-322-2 - Solid Waste Surface Impoundment Location Standards
(1) A new solid waste surface impoundment or
the expansion of an existing solid waste surface impoundment shall meet the
location standards of Subsection
R315-302-1(2).
(2) An existing solid waste surface
impoundment shall be subject to the following location standards:
(a) the ecologically and scientifically
significant natural area standards of Subsection
R315-302-1(2)(a)(ii);
(b) the floodplain standards of Subsection
R315-302-1(2)(c)(ii);
and
(c) the standards listed in
Subsection R315-302-1(2)
in effect at an existing facility for protecting municipal drinking water,
wetlands, and groundwater, before applying for a permit, shall be maintained
for the life of the facility unless otherwise determined by the
director.
(3) Location
Standards Exemptions.
(a) Except for the
standards listed in Subsection R315-322-3(3)(b), the director may grant an
exemption from any location standard of Subsection
R315-302-1(2)
for a solid waste surface impoundment, on a site-specific basis if the director
determines that the exemption will cause no adverse impacts to human health or
the environment. If an exemption is granted, the director may require that the
solid waste surface impoundment have a more stringent design, construction,
monitoring program, or operational practices to protect human health or the
environment.
(b) No exemptions
shall be given for the following location standards at a solid waste surface
impoundment:
(i) ecologically and
scientifically significant natural area standards of Subsection
R315-302-1(2)(a)(ii);
(ii) floodplain standards, unless the
exemption meets the criteria of Subsection
R315-302-1(2)(c)(ii);
(iii) the location standards for wetlands for
a new or lateral expansion of an existing facility, unless the exemption meets
the criteria of Subsection
R315-302-1(2)(d);
or
(iv) the location standards for
groundwater for a new or lateral expansion of an existing solid waste surface
impoundment that accepts hazardous waste from a very small quantity generator
as defined in Subsection
R315-260-10(c),
unless the exemption meets the criteria of Subsection
R315-302-1(2)(e)(vi).
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.