Utah Admin. Code R614-3-19 - Electrical

A. Electrical installation shall conform to the requirements of the local authority having jurisdiction provided that the requirements are substantially similar to the latest published addenda or revision of the National Electrical Code, ANSI/NFPA 70 and Standard for Electrical Safety Requirements for Employees Work Places ANSI/NFPA 70e.

B. Protection of Employees.

1. The employer shall inspect all electrical installations and utilization equipment as necessary to maintain it in good repair. Any damage which may be a hazard to employees shall be repaired prior to use by an employee.

2. No employer shall permit an employee to work or operate equipment within 10 feet of an electrical power circuit to which contact may be made, unless:

a. The employee is protected against electrical shock by deenergizing the circuit and grounding it or by guarding it by effective insulation or other means.

b. The employee is trained in recognition and avoidance of hazards associated with electrical circuits.

3. No employee shall be permitted or required to use electrical utilization equipment that is not intrinsically safe and approved for the location.

Notes

Utah Admin. Code R614-3-19