Utah Admin. Code R722-310-16 - Identification of Licensees

(1)

(a) A licensee shall be issued an identification card by the bureau which identifies the licensee as a bail enforcement agent, bail recovery agent or bail recovery apprentice.

(b) The identification card shall indicate on its face if the licensee is authorized to carry a loaded and concealed firearm as provided in Subsection 53-11-108(5).

(2)

(a) A bail enforcement agent or bail recovery agent may possess and display a badge that is identical to the badge depicted on the bureau's website in accordance with Section 53-11-121.

(b) A bail enforcement agent or bail recovery agent may obtain a badge from any source, so long as it complies with the following specifications:

(i) the badge shall be 2.55 inches high and 2.66 inches wide;

(ii) the badge shall be in the shape of a five-point star on a circle;

(iii) the star shall be gold in color and the circle must be silver in color;

(iv) the center of the star shall be black in color and contain a seal with the phrase "Liberty and Justice For All";

(v) the text of the badge shall be written in block lettering and must be black;

(vi) the silver circle shall contain two panels with writing to indicate whether the agent is a bail enforcement or bail recovery agent; and

(vii) the badge shall contain two gold panels with writing to indicate the word "Utah" on the top panel and the agent's license number on the bottom panel.

(3) The design approved by the board under Subsection 53-11-121(5) shall contain the words "bail enforcement agent" or "bail recovery agent" written on both the chest and back in writing which is:

(a) at least two inches in height on the back;

(b) at least one half of an inch in height on the front; and

(c) in a color that contrasts with the color of the item of clothing.

Notes

Utah Admin. Code R722-310-16

Adopted by Utah State Bulletin Number 2025-04, effective 2/9/2025