Utah Admin. Code R909-2-26 - Overweight Non-Divisible Loads Exceeding 125,000 Pounds Gross or Axle Weights
(1) Loads exceeding
125,000 pounds gross, or axle weights in Section
R909-2-24 may only purchase
single trip permits.
(2) Axle,
bridge, and gross weight allowances will be determined based on the
non-divisible bridge table formula ~1.47 x 500 (LN/N-1 + 12N + 36) or in
accordance with the bridge table.
(3) 9-foot-wide axles are allowed 7.5% more
weight than 8-foot-wide axles.
(4)
10 feet wide axles are allowed 15% more weight than 8 feet wide
axles.
(5) If using an axle
equipped with eight tires, rather than four, add 10% to the weight authorized
for an 8-foot-wide axle group.
(6)
Tires must comply with the manufacturer's tire load rating as indicated on the
tire side wall.
(7) STE operations
must have an STE profile sheet if the axle limitations specified in Table 3, or
the bridge table are exceeded.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.