Except when certification is not required under s.
DHS 159.06, an asbestos company shall ensure compliance
with the following when conducting an asbestos abatement activity:
(1) PROTECTION OF PUBLIC HEALTH. The asbestos
company shall protect the health of occupants, visitors, workers, and any other
persons near an asbestos abatement activity by using documented engineering
controls and work practices that prevent the release of asbestos fibers into
the air.
(a) For all asbestos abatement
activities, the company shall follow work practice standards established by DNR
under s.
NR 447.08, by OSHA under, and by the Wisconsin
department of safety and professional services under ch. SPS 332.
(b) For asbestos abatement activities
involving the exterior of a structure, the company shall use appropriate
engineering controls to prevent asbestos debris and fibers from entering the
interior of the structure.
(2) PROJECT LOG. The company shall maintain a
project log onsite for each workday of an asbestos abatement activity. The
daily project log shall include the date, project number as identified on the
notification form required under s.
DHS 159.20, project address, printed name and
certification number of the site supervisor, and the printed name, signature,
reason for entry, department certification number, if appropriate, and the in
and out times for each person who enters the regulated area.
(3) OCCUPANT PROTECTION PLAN. A written
occupant protection plan shall be posted in plain view outside each regulated
area when the structure on which the asbestos abatement activity is being
conducted is occupied or furnished. The plan shall be written on a form
provided or approved by the department and shall describe how occupants and
furnishings will be protected from exposure to asbestos fibers during the
asbestos abatement activity and shall include all of the following:
(a) The name, address, and telephone number
of the company conducting the asbestos abatement activity.
(b) The address of the property where the
project is being conducted and the name and telephone number of the property
contact person.
(c) The project
starting and ending dates and work schedule or shifts.
(d) A statement that only authorized persons
using appropriate personal protection may enter regulated areas.
(e) A description of the engineering controls
that will be used to prevent contamination of the structure, including the
heating, ventilating, and air conditioning systems.
(f) A description of any clearance activities
that will be conducted.
Note: Occupant protection forms are available
on the department's website at www.dhs.wi.gov/asbestos or may be
obtained from the Asbestos and Lead Unit: plicasbstoslead@dhs.state.wi.us;
608-261-6876; 1 W. Wilson St, Room 137, PO Box 2659, Madison, WI 53701-2659.
(4) WORKER
SUPERVISION. The asbestos company shall ensure that each asbestos worker
conducting asbestos abatement activities has direct onsite supervision by an
asbestos supervisor certified under this chapter and that each exterior
asbestos worker conducting asbestos abatement activities has direct onsite
supervision by an asbestos supervisor or exterior asbestos supervisor certified
under this chapter.
(5)
VERIFICATION OF WORKER CERTIFICATION STATUS. The asbestos company shall verify
that each individual who conducts or supervises an asbestos abatement or
asbestos management activity for the company is certified in the appropriate
discipline required for the activity.
(6) SUPERVISOR AUTHORITY. The asbestos
supervisor or exterior asbestos supervisor shall have the authority to shut
down an asbestos abatement activity or take other prompt corrective measures to
eliminate asbestos hazards and to ensure compliance with asbestos
regulations.