Wis. Admin. Code Department of Corrections DOC 348.05 - Physical environment
(1) SLEEPING ROOMS.
(a) Sleeping rooms shall provide not less
than 56 square feet for single occupancy and 100 square feet for double
occupancy. The distance between the floor and ceiling may not be less than 8
feet and the distance between walls may not be less than 7 feet.
(b) Each occupant of a sleeping room shall
have a bed, desk, chair and storage area for personal property.
(c) Sleeping rooms shall be provided with
light of at least 10 footcandles and with the capability to reduce lighting
during sleeping hours to a level which permits security checks.
(d) Each sleeping room shall be equipped with
a door and shall have an observation panel which permits security
checks.
(e) Locks, if provided on
sleeping room doors, may not prevent the occupant or occupants from leaving the
room.
(2) DORMITORIES.
(a) Dormitories shall have a minimum floor
area of 50 square feet per occupant and a floor to ceiling height of not less
than 8 feet.
(b) A secured locker
for clothing and personal property shall be provided for each occupant of the
dormitory.
(c) The number of beds
in each dormitory may not exceed the number of occupants indicated by square
footage requirements specified in par. (a).
(d) Dormitories shall be provided with light
of at least 10 footcandles and with the ability to reduce lighting during
sleeping hours to a level which permits security checks.
(e) Locks, if provided on entrance and exit
doors of a dormitory, may not prevent the occupants from leaving the
dormitory.
(3) DAYROOMS.
(a) All sleeping rooms and dormitories shall
be provided with one or more dayrooms in their immediate vicinity that are
accessible to inmates. A dayroom shall provide a minimum of 35 square feet for
each occupant of the dormitories and sleeping rooms which have access to it.
The distance between the ceiling and floor of a dayroom shall be at least 8
feet.
(b) Each dayroom shall have
sufficient tables and seating for the number of occupants of the dormitories
and sleeping rooms that have access to it.
(c) Lighting in dayrooms may not be less than
10 footcandles.
(4)
MULTIPURPOSE ROOM. Each facility shall provide a multipurpose room for
recreation and physical exercise. The multipurpose room shall have a minimum of
either 300 square feet or 35 square feet per occupant at maximum capacity of
the facility, whichever is greater.
(5) VISITING AREA. Each facility shall
provide a visiting area separate from inmate sleeping rooms, dormitories,
dayrooms and multipurpose rooms. Space in the visiting area shall be sufficient
to permit 10% of the maximum population of the facility to visit at the same
time.
(6) RECEIVING AND PROCESSING
AREA. Each facility shall have an area for receiving and processing inmates.
The area shall be immediately adjacent to the entrance of the facility and
shall be designed so that activities conducted within the area cannot be viewed
by the public.
(7) TOILET AND
BATHING FACILITIES. The facility shall have sufficient washbasins, stools and
urinals, and showers or bathtubs. The minimum number of bathroom fixtures is
specified in Table
DOC 348.05.
TABLE DOC 348.05
REQUIRED BATHROOM FIXTURES
|
Stools |
Urinals |
Washbasins |
Bathtubs or Shower |
|
|
Males |
Females |
Males |
||
|
One stool for every 8 males or fraction thereof |
One stool for every 8 females or fraction thereof |
Urinals maybe substituted for up to 2/3 of the required number of stools |
One washbasin for every 8 persons or fraction thereof |
One bathtub or shower for every 10 persons or fraction thereof |
(8) DOORS AND
LOCKS.
(a) Each entrance and exit door to the
facility shall be equipped with a locking mechanism that prevents unauthorized
entry. The locking mechanism may not prevent exiting by inmates or
staff.
(b) Entrance and exit doors
shall be provided with an indicator light in the staff area and with an alarm
system which will sound when the door is opened without
authorization.
(c) Entrance doors
shall have vision panels to permit identification of individuals before they
enter the facility.
(9)
WINDOW SCREENS. All windows accessible to inmates shall have screens of .047
gauge with tensile strength of 1600 pounds per linear inch after weaving to
prevent the introduction of contraband.
(10) EXTERIOR APPROACHES. The exterior of the
facility and approaches to the facility shall be well lighted at night to
permit observation of persons approaching the building.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.